README.md

I separated the code for this project in three main files. 
<ul>
<li>The primary code is contained in "Project_1.mlx". The code in this file covers:
<ul>
<li>From section (2)
<ul>
<li>The dynamical system model, including the transfer function in all required forms except ARMAX, and the bode plot</li>
<li>The disturbance model in all required forms except ARMAX, and the bode plot</li>
<li>The response characteristics of the dynamical system and the disturbance</li>
<li>The root locus for both the dynamical system and disturbance model</li>
</ul>
</li>
<li>From sections (3)-(4)
<ul>
<li>The controller design, including the transfer function in all required forms except ARMAX</li>
<li>The controller design, including the transfer function in all required forms except ARMAX</li>
</ul>
</li>
<li>From section (5):
<ul>
<li>The design of the new controller</li>
</ul>
</li>
</ul>
<li>The file "Project_1_final_part.mlx" contains the code used in part (6) (stability under parameter uncertainty).</li>
<li>The file "P1_simulation_script.mlx" contains the code used to run the Simulink diagrams that generated the system response plots in sections (3), (4), and (5).</li>
</li>
</ul>

How to run the code:
<ul>
<li>Running "Project_1.mlx" should automatically generate most of the graphs and figures used in my report; some responses may be suppressed to save memory or space, but those are generally items (e.g. a written list of pole locations or a written transfer function) that are directly copied in the report.
</li>
<li>Running the appropriate section of "P1_simulation_script.mlx" will run the corresponding Simulink diagram used to generate the system responses shown in sections (3)-(5). All graphs should be set to display those used in the report as-is.
</li>
<li>Running "Project_1_final_part.mlx" will automatically generate most of the graphs used in Section (6). Note that I did manually change k1 for part of my analysis in section (6), but the rest of the section should run automatically without changes.
</li>
</ul>