-
Notifications
You must be signed in to change notification settings - Fork 0
Dataset Description
Our data came from two tools on the Rover, Laser-induced breakdown spectroscopy (LIBS) and physical samples taken from the ground and put into tubes to be studied.
Of the LIBS data, we have two types.
- LIBS scans of Mars rock
- LIBS scans of Earth rock taken to Mars to be used for calibration (scct)
| Col name: | Data type: | Levels: | What: |
|---|---|---|---|
| Target | Character | Name of location the LIBS was taken | |
| Point | Factor | 1 - 28 | |
| Sol | Numeric | Int > 0 | The Mars day (since start of mission) that the rover took the LIBS point was taken |
| Lat | Numeric | Where the rover was when the LIBS point was taken | |
| Lon | Numeric | Where the rover was when the LIBS point was taken | |
| Type | Character | What is it a scan of? (Sample, AEGIS, other?) |
| Col name: | Data Type: |
|---|---|
| "SiO2" | Numeric |
| "SiO2_stdev" | Numeric |
| "TiO2" | Numeric |
| "TiO2_stdev" | Numeric |
| "Al2O3" | Numeric |
| "Al2O3_stdev" | Numeric |
| "FeOT" | Numeric |
| "FeOT_stdev" | Numeric |
| "MgO" | Numeric |
| "MgO_stdev" | Numeric |
| "CaO" | Numeric |
| "CaO_stdev" | Numeric |
| "Na2O" | Numeric |
| "Na2O_stdev" | Numeric |
| "K2O" | Numeric |
| "K2O_stdev" | Numeric |
| "Total" | Numeric |
| "distance_mm" | Numeric |
| "Tot.Em." | Numeric |
Feature data is the same as PIXL, concentration of elemental compounds, though without a few of the elemental compounds PIXL includes. It also has the addition of standard deviations, Total, etc, which PIXL doesn't have.
Only the "scct" targets. That is, only the earth references. Note that none of these earth references are in the normal LIBS data frame.
| Col name: | Data Type: | Levels: | What: |
|---|---|---|---|
| Target | Character | Name of location the LIBS was taken, all start with "scct_" | |
| Point | Factor | 1 - 28 | |
| Sol | Numeric | Int > 0 | The Mars day (since start of mission) that the rover took the LIBS point was taken |
| Lat | Numeric | Where the rover was when the LIBS point was taken | |
| Lon | Numeric | Where the rover was when the LIBS point was taken | |
| Type | Character | What earth mineral is it calibrating for |
| Col name: | Data Type: |
|---|---|
| "SiO2" | Numeric |
| "SiO2_stdev" | Numeric |
| "TiO2" | Numeric |
| "TiO2_stdev" | Numeric |
| "Al2O3" | Numeric |
| "Al2O3_stdev" | Numeric |
| "FeOT" | Numeric |
| "FeOT_stdev" | Numeric |
| "MgO" | Numeric |
| "MgO_stdev" | Numeric |
| "CaO" | Numeric |
| "CaO_stdev" | Numeric |
| "Na2O" | Numeric |
| "Na2O_stdev" | Numeric |
| "K2O" | Numeric |
| "K2O_stdev" | Numeric |
| "Total" | Numeric |
| "distance_mm" | Numeric |
| "Tot.Em." | Numeric |
Sample data is the data for the, currently 16, physical samples the rover has taken.
A data frame containing all the meta data for the samples. This can be appended to Pixl, Lithology, or Sherloc based on "Sample".
| Col name: | Data Type: | Levels: | What: |
|---|---|---|---|
| Sample | Integer | 1 - 24 | Note that this sample number does not match the sample numbers in the analyst notebook and initial reports |
| Name | Character | Unique name given to each sample | |
| Sol | Numeric | Int > 0 | The Mars day (since the start of mission) that the sample was taken |
| Lat | Numeric | Where the sample was taken | |
| Lon | Numeric | Where the sample was taken | |
| Abrasion | Factor | The name of the bit of rock they abraided | |
| Campaign | Factor | "Crater Floor" or "Delta Front" | Indicates whether the sample location was in the crater floor or at the delta front |
| Type | Factor | "Sedimentary", "Igneous", or "Atmospheric" | Indicates the type of rock the sample is. |
| SampleType | Factor | "rock core", "regolith", or "atmospheric" | Indicates how the sample was obtained |
Starts with the sample number. Following is all numeric elemental compound concentrations.
| Col name: | Data type: |
|---|---|
| Sample | Integer |
| "SiO2" | Numeric |
| "TiO2" | Numeric |
| "Al2O3" | Numeric |
| "FeOT" | Numeric |
| "MgO" | Numeric |
| "CaO" | Numeric |
| "Na2O" | Numeric |
| "K2O" | Numeric |
| "P2O5" | Numeric |
| "SO3" | Numeric |
| "Cl" | Numeric |
| "Cr2O3" | Numeric |
| "MnO" | Numeric |
Starts with the sample number. Following columns are all factor data (binary 0 or 1) representing the presence or absence of minerals.
Main change to Lithology data set was the renaming and ordering of the minerals to match the sherloc data set.
| Col name: | Data type: |
|---|---|
| Sample | Integer |
| "Plagioclase" | Factor |
| "Sulfate" | Factor |
| "Ca-sulfate" | Factor |
| "Hydrated Ca-sulfate" | Factor |
| "Mg-sulfate" | Factor |
| "Hydrated Sulfates" | Factor |
| "Hydrated Mg-Fe sulfate" | Factor |
| "Perchlorates" | Factor |
| "Na-perchlorate" | Factor |
| "Amorphous Silicate" | Factor |
| "Phosphate" | Factor |
| "Pyroxene" | Factor |
| "Olivine" | Factor |
| "Carbonate" | Factor |
| "Fe-Mg carbonate" | Factor |
| "Hydrated Carbonates" | Factor |
| "Disordered Silicates" | Factor |
| "Feldspar" | Factor |
| "Quartz" | Factor |
| "Apatite" | Factor |
| "FeTi oxides" | Factor |
| "Halite" | Factor |
| "Iron oxide" | Factor |
| "Hydrated Iron oxide" | Factor |
| "Organic matter" | Factor |
| "Sulfate+Organic matter" | Factor |
| "Other hydrated phases" | Factor |
| "Phyllosilicates" | Factor |
| "Chlorite" | Factor |
| "Kaolinite (hydrous Al-clay)" | Factor |
| "Chromite" | Factor |
| "Ilmenite" | Factor |
| "Zircon/Baddeleyite" | Factor |
| "Fe-Mg-clay minerals" | Factor |
| "Spinels" | Factor |
Starts with the sample number. Following columns are all factor data representing the certainty in the presence of minerals. This is discrete data though, with the only options being "0" (No detection), "0.25" (Possible but not confirmed), "0.5" (Almost certain, working on confirming), "0.75" (?), and "1" (confirmed).
Main change made to the SHERLOC data set is that in v1 it has already been converted into the same data frame format as the other data sets.
| Col name: | Data type: | Levels: | What: |
|---|
[Needs to be finished]